bios快速启动无法识别硬盘?

PowerEdge服务器

PowerEdge服务器
加入对PowerEdge服务器和系统管理实践的讨论

bios快速启动无法识别硬盘?

此问题未回答

服务器t41

原有2块硬盘 各500g 组了raid1 做备份

现在打算换系统 故增加2块硬盘 1块 500g (已经做好系统)

一块200g做缓存

但在开机按f11进入快速启动只有1块盘能识别(就是那个原有的raid阵列)

但是进入系统能正确识别所有硬盘

怎么办怎么办怎么办???

怎么以新硬盘启动

所有回复
  • ItemConnectorDescription
    1 PCIE_G2_X4
    PCIE_G2_X4
    PCIE_G1_X4
    PCIE_G2_X4
    PCIe connector x4 (slot 1)
    PCIe connector x4 (slot 2)
    PCIe connector x4 (slot 3)
    PCIe connector x4 (slot 4)
    2 PCIE_G2_X8 PCIe connector x8 (slot 5)
    3 FAN System fan connector
    4 CPU2 Processor 2
    5 iDRAC6 Enterprise iDRAC 6 Enterprise card connector
    6 B3
    B2
    B1
    B4
    Memory module slot B3 (white release lever)
    Memory module slot B2 (white release lever)
    Memory module slot B1 (white release lever)
    Memory module slot B4
    7 12V 8 pin power connector
    8 INT_USB1 Internal USB module connector 1
    9 INT_USB 2 Internal USB module connector 2
    10 PDB_CONN Power distribution board power connector
    11 PWR_CONN 24 pin power connector
    12 CPU1 Backplane power connector
    13 BP_I2C Backplane I2C connector
    14 A3
    A2
    A1
    A4
    Memory module slot A3 (white release lever)
    Memory module slot A2 (white release lever)
    Memory module slot A1 (white release lever)
    Memory module slot A4
    15 INTRUSION Chassis intrusion switch connector
    16 HD_ACT_CARD Hard drive activity connector
    17 CTRL_PNL Control panel connector
    18 SATA_A
    SATA_B
    SATA_C
    SATA_D
    SATA_E
    SATA_F
    SATA connector A
    SATA connector B
    SATA connector C
    SATA connector D
    SATA connector E
    SATA connector F
    19 PWRD_EN
    NVRM_CLR
    Password enable jumper
    NVRAM clear jumper
    20 BATTERY System battery
    21 iDRAC6 Express iDRAC6 Express card connector

    看看主板图可能会更好点!

  • 重装系统阵列卡驱动是不是要打??不能识别在阵列卡下的硬盘。。。。(新系统进去了)

  • 安装的是什么操作系统?驱动分系统版本。